Take the 2-minute tour ×
Seasoned Advice is a question and answer site for professional and amateur chefs. It's 100% free, no registration required.

I have a plastic tub with a screwtop lid, full of palm sugar. It's a 500g tub, about 10cm high and about 10cm diameter. Usually I buy the individual cubes of palm sugar and this time I thought I'd cut down on packaging and buy the bigger size, but now I have a problem.

My problem is getting the palm sugar OUT of the tub.

It's like cement, and I have tried using spoons (they bend), knives (ditto) and a corkscrew (just bores a hole rather than breaking it up) to get some of the sugar out. Tonight I also tried sitting the tub in a bath of freshly boiled water (approx 90 degrees celcius), and sprinkling some over the surface of the sugar to try to soften it a little. No success.

This question describes how to deal with a rockhard piece of sugar like mine, but without packaging.

Does anyone know how to get it out of the tub in the first place so that I can go ahead and grate it?

share|improve this question
1  
What power tools do you have at your disposal? –  Chris Cudmore Nov 24 '11 at 21:35
add comment

5 Answers

up vote 5 down vote accepted

You could use the corkscrew in its classic role. Bore a hole, and then use the corkscrew to pull the sugar out in one piece. You should probably lay the tub on its side for this, as the sugar weight is probably too much to stay on the corkscrew.

The other option, though rather extreme, is to cut away the plastic tub with wire cutters or shears. That way, you're peeling the tub away, and will be left with the same lump, but no tub.

share|improve this answer
add comment

Try microwaving it briefly. That works with hardened brown sugar anyway. the goal is to warm it, not cook it or melt it though! Once it's softened consider re-portioning it into smaller containers/ or creating spoonfuls of the size you normally use and letting those cool, then storing those.

share|improve this answer
add comment

place the jar in warm or hot water for a few seconds. The sugar will loosen up from the sides of the container. At that point it should b fairly simple to remove. Worked very well for me.

share|improve this answer
add comment

I find scraping the sugar with a dinner knife works. Rotating it at a angle in a circular motion. So you end up with shavings.

share|improve this answer
1  
If you read the question attentively, you'll notice that the OP has tried and rejected using a knife, and that the issue is not with grating the sugar, but with getting it out of the container so it can then be grated. –  Marti Nov 23 '11 at 1:17
add comment

It sounds like gouging and digging are your main options. Referring to my own kitchen, my corkscrew wouldn't work, but the round honing edge I have would, my kitchen shears, a small chefs knife could, cutting downward, line up cubes to pry/yank out with something else rigid.

After that, I think @Carmi isn't too extreme with suggesting to cut the tub away; just break it up once done and put in a different container.

share|improve this answer
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.