Take the 2-minute tour ×
Seasoned Advice is a question and answer site for professional and amateur chefs. It's 100% free, no registration required.

Can anyone recommend a method for cleaning the clogged holes in a "Basket" of an espresso machine Portafilter? I had this problem with both DeLonghi and Saeco home espresso machines.

For example, in Care of Saeco Pressurized Portafilters (regarding Saeco Manually Pressurized Portafilter) they caution against using metal pins.

Any suggestions of methods or cleaning materials?

share|improve this question
    
This is an awfully specific question. Is there any way to make it applicable to a broader audience? –  BobMcGee Jul 4 '11 at 22:40
    
Rephrased to be more general –  Itamar Jul 5 '11 at 9:54
    
What is the basket made of? A hot acid bad is usually good for this kind of thing, but there are some materials which react badly to it, e.g. aluminium. –  rumtscho Jul 5 '11 at 13:41
add comment

6 Answers 6

up vote 12 down vote accepted

I alone on the planet seem to have solved the endless problem of cleaning the fine holes of an espresso portafilter, or a Moka express fine steam filter. None of the liquid or abrasive cleaning apps work, period. Instead, in the past, one had to use a pin to poke out the minute holes — task so laborious and hopeless than most espresso and Moka machines in the world are hampered by limited filtration.

No longer. The pin-holes are plugged with coffee fibre, which burns. Place the filter over a gas flame, either side, for 10 minutes, tapping it with tongs occasionally, and bingo... A CLEAN FILTER. All the minute coffee fibre plugs burn or pop out. Best to use a small coffee pot rack on top of your smallest hob gas burner for this. And metal tongs.

Will I be knighted for this?

share|improve this answer
    
Chad, you are a genius. This worked great and took no longer than 5 minutes. Far more effective than soaking or pin-pricking, and no need to buy a new basket. I salute you. –  user8562 Jan 4 '12 at 20:51
    
Thanks. This actually worked ! –  Itamar Aug 13 '12 at 18:13
    
Chad's method of roasting the gunk out of the holes worked amazingly well...and quickly. I took the filter off the heat and clanged it on the tile and thousands of tiny burnt dots rained down. Almost all of the holes were clear. thanks, Chad! –  user11522 Sep 10 '12 at 23:23
    
@Mike welcome to the site. We prefer answers to offer new information on the question; if you liked an existing answer, the proper way of showing your appreciation is to upvote it, making it more discoverable and giving its author reputation. As you yourself don't yet have the reputation required, I converted your answer to a comment this time. –  rumtscho Sep 10 '12 at 23:53
    
Wow this worked amazing on a Cuisinart - I held it over a grill flame for like 3 minutes, heard some hissing, then ran inside, through it in the machine and let it fly and right through the first time. –  PW Kad Apr 9 at 23:09
add comment

I would let the basket soak in a hot water ( just from the tap ) bath of Cafiza for about 15 minutes to dissolve the coffee oils. If the problem is scale buildup I would try a soak in a citric acid bath, about 2 tablespoons to 1 liter of water. Of course a good stiff brush could do the trick too with both the methods described here. An old toothbrush maybe.

I would also recommend getting on a routine cleaning schedule. I do a complete espresso machine and grinder cleaning about every 4-5 weeks and it keeps some of these problems from happening. Once you get into the habit of doing it and develop your own personal system it is not too hard to keep up, and you learn a lot about the internals of your machines, which can come in handy if you want to mod or need to do repairs.

Here is a pretty good how-to on cleaning the portafilter and basket link

share|improve this answer
    
BTW--I've found that a toothbrush is a very good "stiff brush" for this purpose and easily reaches the holes from either side. –  dmckee Dec 11 '11 at 2:22
    
Cafiza is good stuff but from experience it needs more than 15 mins if the thing is blocked: I'd recommend soaking in several changes until no more brown stuff comes out. –  onedaywhen Oct 8 '12 at 10:51
add comment

If the clogging is a result of mineral deposits, soak the "basket" in vinegar for a few hours. Then use a wooden toothpick to gently dislodge any deposits.

share|improve this answer
add comment

There are special detergents for dissolving the coffee oils that are usually used for backflushing portafilter machines. Search for Coffee Clean or Puly Caff

share|improve this answer
add comment

The Chad Evans method worked. I had no idea how much coffee sludge I had that was visible at the bottom of the portofilter. I thought this was a small rubber ring or something! It easily crumbled out with a gentle touch with a dental tool.

I did not want to damage the finish so I chickened out after 4 minutes of cooking over a flame. This successfully fully opened one passage of the portofilter. I am soaking the whole thing over night in espresso cleaner to see if that will free up the other side, but I have a feeling I will be cooking it again to free up the other side.

share|improve this answer
add comment

I am at this moment using hot vinegar and after soaking in that for a while, adding baking soda, getting lots of coffee residue out!

share|improve this answer
    
How hot should the vinegar be? Do you use just vinegar or is it mixed with water? If so, in which proportion? –  J.A.I.L. Nov 13 '12 at 8:55
add comment

protected by Community Oct 12 '12 at 16:31

Thank you for your interest in this question. Because it has attracted low-quality answers, posting an answer now requires 10 reputation on this site.

Would you like to answer one of these unanswered questions instead?

Not the answer you're looking for? Browse other questions tagged or ask your own question.