Take the 2-minute tour ×
Seasoned Advice is a question and answer site for professional and amateur chefs. It's 100% free, no registration required.

I have never found a spring-form pan that does not leak.

I have never been able to wrap a spring-form pan so that some of the water doesn't get into the pan.

I can wrap it so that a lot of the water doesn't come into the pan.

But it seems to me that there must be a method that works to keep the water out entirely. I just haven't figured it out.

How can I wrap a spring-form pan in foil so that water from the bath doesn't leak into it?

share|improve this question
    
Where is the water coming in? Through the false bottom or around the latch? –  Ray Jul 17 '11 at 4:05
    
I think it's seeping in through the bottom, but I never actually considered that it might be the latch. I'm happy to report that this last go-around had the least seepage I've managed to get yet. But it seems like there should be a zero-seepage method. –  Trott Jul 17 '11 at 17:43
    
Until someone makes a springform pan with some silicone or similar to make a good seal, you'll likely never find one that doesn't leak. –  Joe Jul 18 '11 at 3:45
2  
@rumtscho: Baking in a water bath is a pretty standard way to make cheesecake. If you can access Cook's Illustrated, here is an example: cooksillustrated.com/recipes/detail.asp?docid=6303 –  derobert Jul 21 '11 at 21:52
1  
@rumtscho: what kind of a cheesecake doesn't contain eggs? –  Marti Jul 22 '11 at 1:22

4 Answers 4

up vote 6 down vote accepted

If you have 18 inch wide heavy duty foil, pull a square that is 18X18, place your pan in the center of the foil and lift the edges of the foil up around the outside of the pan, effectively making a pan within a pan (spring form inside the aluminum foil pan.

If you only have 12 inch foil, pull two pieces of foil about 18 inches long and put them on top of each other. Along one if the long edges, fold both pieces over about 1/2 inch a few times, crimping each time. Open up the sheets which will create one large piece with a seam down the middle. Put the spring form pan in the middle like above. If your seam is tight it should work as well as the single piece of 18 inch foil.

share|improve this answer
    
It also helps to be really paranoid. I probably triple up when I bake cheese cake. –  Megasaur Jul 18 '11 at 10:47

Cook's Illustrated recently discovered that placing the springform pan inside a slightly larger cake pan works. The slight air gap doesn't negate the water bath's benefits. And of course a cake pan is a solid piece of aluminum, thus completely water tight.

(Haven't personally tested this yet.)

share|improve this answer

put your springform pan in a slow cooker liner or a Reynold's turkey bag. Both are made to withstand heat and work well.

share|improve this answer

They have a wonderful new invention that I use. I bake 3 - 4 cheesecakes a week for my business and the best thing I have found is the crockpot liners. They can withstand the high temperatures of oven baking. I wrap one around the spring form pan and then wrap it with heavy duty foil. I have not had a soggy cheesecake since.

share|improve this answer
    
Caryl Johnson said that a year ago in the answer just above yours although she called it a "slow cooker liner" It's a good idea though, I will do it next time I make a cheesecake. –  Jolenealaska Jan 21 at 19:13

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.