3

If I'm rising dough for a really long time (at home), what techniques are there for keeping the surface moist? What I'm finding is that the crumb comes out as I'd like (very aerated, mature), but that the top forms a skin, causing the side to burst despite scoring on the top with a razor.

1

2 Answers 2

5

The best recommendation I have seen is plain plastic wrap. If you have an oil mister, mist the wrap before using it. If you don't, pour oil into a bowl, enough to form a puddle, and toss your ball of dough in the oil. Then transfer your dough to the rising container (if you use the same bowl you used for oiling, take the dough out, pour out the superfluous oil, return the dough into the bowl). In the best case, the bowl will be deep enough for the dough to rise without the middle touching the wrap, but if it rises more (even with the dough pressing against the wrap), dough with enough gluten development will peel off the oiled wrap with minimal losses, even if it is wet.

The wrap will keep your dough surface moist in both the fridge and outside. It doesn't allow breathing, but this shouldn't be a concern in most cases. If you overyeast the dough, the collection of fermentation byproducts in the bowl will probably make for worse taste than if they are allowed to dissipate, but the correct solution for this problem is to not produce them in the first place. With your "very long times", this is probably not a problem in your case.

You can also use this method for the secondary fermentation. But in the final proofing stage, you have to make sure that your dough never rises enough to touch the wrap, or else the loaf will deform while you are removing the wrap. Also, if you are proofing in banettons, don't oil them, use flour combinations to prevent sticking.

If you are out of plastic wrap, substituting alu wrap is a bad idea, because yeast is very sensitive to metallic ions. Today's non-reactive metal utensils are safe enough for use with yeast dough, but untreated aluminium can be problematic. Try baking paper instead (you may have to tape it to the outer bowl walls).

3
  • 1
    You can also use a kitchen towel with a plate on top to keep it 'sealed'. Personally I use plastic wrap and spray oil, though I spray the dough not the wrap because it's easier. May 24, 2012 at 10:32
  • Actually, I should have mentioned, I'm making baguettes- about half a dozen at a time. This is quite difficult to cover with cling-wrap. I've been thinking I need to get a big plastic tub with a lid and build my own racking system in it, but was wondering if anyone had any better ideas.
    – Mick Sear
    May 24, 2012 at 10:48
  • 2
    In that case, get a big food-grade plastic bag, like a turkey bag, put the baguettes on the back of a sheet pan on some baking paper, and slide the whole shabang into the bag, then seal and put in the fridge. May 24, 2012 at 11:16
1

As an alterantive to plastic wrap, you can also get a professional dough rising bucket:

6L dough-rising bucket

We used to use these in the bakery where I worked, and I still use one at home for bread. The plastic lid seals well, and works great to hold moisture in.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.