Take the 2-minute tour ×
Seasoned Advice is a question and answer site for professional and amateur chefs. It's 100% free, no registration required.

I'd been bought an anodised wok as a birthday present a couple of years back, but recently, when using a honey/mustard marinade, I managed to burn some of the excess marinade, and now can't seem to get the wok clean, not even when putting it through the dishwasher (it is dishwasher safe). What can I do to clean it off that won't affect the anodised coating?

share|improve this question

6 Answers 6

To get the marinade off I would fill the wok with water until all of the offending marinade is covered, then I would boil the water in the wok. This will probably be enough to get the marinade off, or at least loosen it so you can wash it off.

In general though hard anodised cookware should be cleanable with a scourer and a bit of elbow grease.

share|improve this answer

In cookeries that use woks, they immediately put water into the wok (from a faucet built right into the stove area) and boil it, using a bamboo whisk to clean up the junk. Possibly some type of oil or one of those new orange based cleaning solvents (have heard of something called goo gone) would work. Wouldn't suggest oven cleaner, as I think most of those contain lye, which dissolves aluminum. Anything abrasive will also take off the very thin layer of anodization. Good luck.

share|improve this answer
    
Actually, it's a question of how abrasive -- don't take a steel brush to it, but you should be able to get away with a plastic scouring pad, as the anodization process hardens the surface so it can take extra abuse. –  Joe Jul 29 '10 at 19:55

We love to using Baking Soda and water to gently clean cookware. A little bit of hot water seems to work best.

share|improve this answer
    
This is my standby - perfect for anything greasy or sticky, and a mild abrasive for others. I'll resort to Ajax for seriously cooked-on scum, but Ajax on coated metal might be a bad idea. –  Shog9 Jul 22 '10 at 0:48
    
How do you use this? As a paste cold, or some other way? –  Rowland Shaw Jul 26 '10 at 17:58

I never underestimate the power of a good, long soak (1-3 days) in some hot, soapy water. It seems to work it's magic slowly, enhanced by a good scrub along the way. I'd hesitate to use ajax, although baking soda is a nice abrasive.

share|improve this answer

You can use Comet or similar as well as 3M plastic scrubbing pads (aka meany greenies).

share|improve this answer

I'd also suggest 3M's Dobie sponges, available just about everywhere kitchen supplies are sold. They've got a good plastic coating that's safe on non-stick and anodized cookware, but tough enough to remove stubborn burned bits. My parents have been using them for years on their pans, and I've been using them for a shorter number of years on my own.

share|improve this answer

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.