Take the 2-minute tour ×
Seasoned Advice is a question and answer site for professional and amateur chefs. It's 100% free, no registration required.

I would like to make a cutting board from some hardwood I have. I'm pretty sure it has been imported, so I think it might have been fumigated or treated for insects/pests at some point. I've tried researching about this but I found very little, but the little I did find suggested sanding it as the fumigation process would only leave chemicals on the surface. Does anyone have any input? It looks like a good beginners project but I want it to be as food safe as possible.

share|improve this question
1  
Please do not use treated wood for chopping board. It might be easier to dope foreign molecules deep into the grain. Getting the doping material out of the wood would probably require dissection of the piece of wood at angstrom finite dimensions. OTOH, I have yet to come across pressure-treated hardwood. –  Blessed Geek Jan 15 '13 at 1:34
add comment

migrated from diy.stackexchange.com Jan 14 '13 at 14:55

This question came from our site for contractors and serious DIYers.

3 Answers

up vote 7 down vote accepted

If you think the wood was treated or fumigated, I wouldn't trust sanding to make the wood food-safe. As another answer notes, wood is porous and could very well have absorbed the chemicals deeper than you'll sand out.

I would definitely err on the side of caution here and only use wood that you know is safe to begin with. There is no finish that you can use on a cutting board that will keep the base wood completely out of contact with the food, due to knives being used on it.

I would recommend starting with hard maple. It makes durable, great-looking cutting boards, and is completely food-safe.

share|improve this answer
    
ok thank you that helps, I see your point. –  user1470324 Jan 14 '13 at 18:04
add comment

Wood is inherently porous, so the big concern with wooden cutting boards is keeping them relatively sanitary after chopping things like meat and fish on them. Some people use mineral oil or bees wax, although I have personally used coconut oil. Straight cooking oil isn't a good idea because it will go rancid.

One thing that you want to make absolutely sure of is that the wood has not been pressure treated or soaked in any kind of preservatives. If the hardwood was ever exposed or intended to be exposed to outside elements then there is a good possibility that it could be treated with highly toxic preservative chemicals.

share|improve this answer
add comment

My brother is a carpenter, and he would suggest using Salad Bowl Finish (http://www.rockler.com/product.cfm?page=5344) I can personally attest to the fact that it does a nice job - we used it on all the cutting boards in our kitchen.

share|improve this answer
2  
SBF is a great product, but not in this application. The problem here is that SBF (and any film finish--polyurethane, etc) only sits on the surface. It will be worn away and cut through by use as a cutting board, which will expose the treated wood underneath. –  JoeFish Jan 14 '13 at 16:43
add comment

Your Answer

 
discard

By posting your answer, you agree to the privacy policy and terms of service.

Not the answer you're looking for? Browse other questions tagged or ask your own question.