Is there any particular reason why quiches are usually baked in a fluted tin, rather than in a regular straight-sided cake tin?

  • 5
    Do you have any supporting evidence that this is even true? 9/10 quiches I've ever seen are in regular tins.
    – Tetsujin
    Jun 18, 2020 at 12:48
  • 6
    Perhaps the word 'usually' is indeed misleading - it could be that it depends on geography. In my experience quiches have usually be fluted, and googling images of quiches seems to reflect that.
    – chromos
    Jun 18, 2020 at 12:54
  • 4
    Thank you for this. All those years I thought it was just to look pretty, and now I know there is a reason for it. Those are the best questions.
    – RedSonja
    Jun 19, 2020 at 5:25

2 Answers 2


TL;DR Quiche pans are fluted because quiche crusts are ruffled.

Quiche crusts are ruffled for the same geometric reason as muffin liners and some coffee filters are ruffled. Try fitting an inelastic disc into a cylinder, covering the bottom and sides, and the disc builds ruffles on its sides. Since the ruffles of the crust are somewhat fragile, they are best supported within flutes.

This is one of the cases (much rarer than most people think) where it has an objective advantage, as opposed to randomly developed tradition.

Quiches are made with a crust of shortbread or flaky savory pie dough. This dough is not very friendly in handling. It tends to crumble rather than stretch, sticks everywhere to the point of smearing, and has low tolerances with respect to temperature, mechanical stress, and others.

Imagine you have just rolled out your crust - which is hopefully all in one piece, evenly thick, not stuck to your counter or to your rolling pin, not so cold as to crumble from stiffness and not so warm as to smear or lose its flakiness, and circular (as opposed to a map of the Scandinavian peninsula complete with fjords). Getting all these at once is already an achievement which requires quite a bit of skill and/or luck. Now you manage to lift your crust from the counter and place it in the pan.

The crust is now lying such that its center coincides with the center of the pan. The edges are draped over the sides of the pan, so there is a gap between the crust and the pan. You now start fitting the crust into the pan by lifting the edge in one point, and gently stroking the radius pointing to that point from the center to the pan wall, such that the crust lays flush on the bottom of the pan. At that place where the crust meets the pan sides, both the crust and the pan have the same radius.

Now your crust is a bent disc. Let's say your pan is 3 cm deep and has straight, non-fluted sides. Then, if you have the crust follow the side in one point, the radius of the crust at the upper edge of the pan is 3 cm larger than the radius at the same point in the bottom of the pan. Choose a next point 1 cm further the circumference of the pan and also press the crust there. The arc of the pan between the two points will have a 1 cm span - but as the crust has a larger radius, its arc at that place is longer! Basically, when you try to bend the crust to go up the sides of the pan, it ruffles. And you have no elasticity to work with to somehow make the crust get together on top or stretch on the bottom - if you try, it tears or crumbles. You also can't just fit the ruffles beside each other - you can try, but their shape will suffer a lot during baking, if they don't break apart under pie weights during prebaking. If they survive, they will be underbaked because of their thickness.

When you have a fluted pan, the troughs of the fluting take in the ruffles of the crust. You now have a single-thickness crust everywhere without stretching, tearing, or whatever. It bakes properly and doesn't have any problems with geometry. Also, it looks pretty.

Given all of the above, I am pretty sure it was a major factor in the design becoming popular.

For those who have trouble imagining it visually, I found a video which shows the process pretty well. Interestingly, this baker strengthens the crust by folding it double and then smushing it into the flutes, something I have never tried.

  • 4
    That makes perfect sense, +1… despite I've always just done it by crushing the pastry in til it fits, with no ill-effects ;) I always thought it was just a presentation thing.
    – Tetsujin
    Jun 18, 2020 at 14:59
  • Simple physics. The flutes create a surface that prevents too much adhesion as described with muffin liners, etc. Greasing and flouring simulates this idea on cake pans.
    – user85201
    Jun 19, 2020 at 14:08
  • @GWarner I don't follow your argument - how would the flutes prevent adhesion? Muffin liners prevent it because you have a nonsticky substance (paper) touching the muffin tin. The muffin itself sticks quite a bit to the liner.
    – rumtscho
    Jun 19, 2020 at 14:18
  • @rumtscho I oversimplified. The flutes create a less adhesive connection then a flat one. With fluffier and weaker breads and crusts, the flutes provide a more easily acceptable break point much like a scored line of holes provide a tear line on a sheet of paper.
    – user85201
    Jun 19, 2020 at 14:29
  • As you described in your answer the doughs density will naturally leave small air pockets that allow for easy separation. Draping the crust over helps this even more
    – user85201
    Jun 19, 2020 at 14:37

A quiche is simply a French, savory, custard based tart. Tarts are typically "short" based pastries, like a pie crust. They are usually prepared in a shallow tart pan with either angled, straight, or fluted sides. Whether or not it is "typical" to prepare them in fluted tart pan is debatable. The edge design of the cooking vessel has little influence on the result, other than visual appeal.

  • That's not debatable. Quiche are prepared in fluted-side pan.
    – njzk2
    Jun 20, 2020 at 18:34
  • Also, is it still a custard if if contains both the yolk and the white?
    – njzk2
    Jun 20, 2020 at 18:34

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.