I am a reasonably proficient casual kitchen user and I have a set of kitchen knives I bought from a (British) supermarket a few years ago. Recently I've noticed they've become less good at cutting things than they were before.

(I am purposely avoiding words like 'sharp', 'dull', 'sharpen' and 'hone' in this question because I don't want to accidentally misuse them.)

There are plenty of questions on this site from people who are interested in acquiring the equipment and developing the skills to maintain their knives – good for them! But this is a skill set I'm not particularly fussed about developing, and my knives are not high-quality enough to warrant paying someone to do something to them.

Instead, I would like to know the simplest thing I can do to make my knives better at cutting, preferably with equipment that's not too expensive and is easy to get hold of.

For example, I could get this 'knife sharpener', or this 'sharpening steel' at my local large supermarkets. But having seen the number of people on this website who seem to regularly damage/ruin their knives by doing the wrong thing, I'd like a little guidance that I'm on the right track before I start.

  • 2
    There are many questions on this site about knife sharpening and sharpeners, like this one, or this one (which includes a nice overview of other questions). I'm not sure if your question is sufficiently different to not be a duplicate.
    – LSchoon
    Commented Aug 12, 2020 at 12:07
  • 2
    @dbmag9 the question is not different, unless you want an answer stating "there is nothing you can do". The only way you can get a knife better at cutting is by regularly maintaining it through sharpening and honing. You can either do it yourself (which your question excludes) or pay somebody (which your question also excludes). There is no further option available. If this is the information you were missing, we can reopen and I can rewrite this comment as an answer.
    – rumtscho
    Commented Aug 12, 2020 at 12:54
  • 2
    @rumtscho I thought I'd expressed myself clearly but I guess I didn't. I absolutely did not intend to exclude doing it myself; those links in the final paragraph were intended to show possible options which I would be happy to follow. I intended to exclude answers of the form "acquire this tool and practice with it for years to develop the skill, or pay someone who already has this skill". My impression was that for some knives, there is no option that does not require great skill but that for more everyday kitchen knives ...
    – dbmag9
    Commented Aug 12, 2020 at 13:16
  • 2
    OK, I think I now understand better where your confusion comes from. I'm afraid that the answer still doesn't give you better options that you already know of, but hopefully it can at least clarify things.
    – rumtscho
    Commented Aug 12, 2020 at 13:35
  • 2
    @rumtscho Thanks – I'm increasingly certain that the answer is essentially 'yes, use the sharpener you linked first and then the steel every so often, but don't expect miracles' but hopefully someone has it in them to write a more authoritative version.
    – dbmag9
    Commented Aug 12, 2020 at 13:42

6 Answers 6


Yes, you can keep an everyday useful kitchen knife serviceable with the Anysharp you linked. For the majority of non-serrated knives sold in a supermarket it will be fine. I've got one, and use it on my Ikea, Sainsburys and Victorinox knives. I can get a better edge with stones, but only once I've got my hand back in, so I don't bother. I've got some better knives that it doesn't work on because the angle is different - so I end up not using those as much. It's a bit aggressive really, so probably wouldn't be ideal on a quality knife even of the right angle, except for restoring a chipped blade. It's not quite foolproof, but nearly. The suction cup needs a good surface on something heavy to stick to, end you need to be careful to hold the blade square to the grinders.

That steel is OK for finishing the job if you can be bothered, but it's optional (I've got almost the same one, and only really use it before carving meat, which I do about once a year).

This will seems almost heretical to some people here, but if you just want to cook and eat, and not play with knives, that's fine. But in that case don't waste your money on posh knives either.

  • 1
    I'd agree with this. A drag-through will eventually give you wavy edges, but for a zero-effort, zero-skill, almost no cost method, it's "close enough for jazz".
    – Tetsujin
    Commented Aug 23, 2020 at 12:13
  • I'm with you, I have an electric sharpener, stones and a steel I use consistently. But I'm kind of a cooking nerd, and it took me 10 years to get to the point I didn't screw things up using them. I've never used that particular sharpener, But If you're not spending hundreds on knives and taking months to choose the perfect set, don't spend hundreds and months on a sharpening system.Just use a decent pull through sharpener, and maybe a honing steel and use them frequently. Your 20-50 pound knife will probably only last you 15 years instead of 50. Commented Aug 27, 2020 at 14:30
  • I got mine out the other day, before carving a chicken. A few drags through the anysharp finished with the steel and I realised all my knives were overdue!
    – Chris H
    Commented Aug 27, 2020 at 14:53

Let's define three variables with which we want to characterize knife sharpening tools:

  1. The best possible end state of the knife if the tool has been used expertly
  2. The worst possible end state of the knife if the tool has been used improperly
  3. The amount of effort needed for a person to go from "have never used it" to "using it expertly"

The first thing you have to recognize is that these three variables are independent of each other. The second one is that the evaluation doesn't somehow reverse for different kinds of knife - it is not that the type of knife doesn't matter, because an expert with a whetstone will get a worse "best possible result" with a cheap stamped knife than with a quality knife. It is that, if tool A performs better than tool B in one of the three dimensions on a quality knife, it also performs bettre in one of the three dimensions on a bad knife (there are exceptions, but I don't want to go into deep details here).

Now imagine a three-dimensional space spanned by the three variables (I don't have a way to draw it easily for this answer). It is important to note that it is not a single quadrant - so if the initial state of the knife is at zero, then the worst possible state for some tools can get into negative numbers.

The traditional system of a sharpening stone (or a combination of sharpening stones with different grits) and a leather strop for honing is at one corner of this space: It has a higher "best possible result if expertly used" than all other tools, a worse "worst possible result" than all other tools, and a higher "effort to learn" than all other tools. This makes it the best choice for afficionados - they happily expand the effort to learn and stop caring about the "worst possible result" variable.

If you are looking at the other tools, the problem is: they are all over that space, and you have no way to reliably find out where they are. Sure, it would be simple to use a tool which either has a very small gap between "best possible result" and "worst possible result" and as long as both are above zero, this would be OK for you. Or finding a tool which has a very low "effort to learn expertly" and an acceptable "best possible result". In both cases, you will save effort as compared to learning a whetstone. But simple is not easy: since you cannot recognize which tool fulfills these criteria, you are left with trying them out.

You can try to reduce the uncertainty by the usual way of searching reviews for a specific make and model. The problem here is that reviews usually don't recognize these three variables, but instead tend to give a single evaluation of the tool's performance, which is neither the best nor the worst possible end result, but the end result obtained with the reviewer's skill, and we cannot know what the reviewer's skill is. This makes their reported result a bad predictor for your future result if you buy the tool. Similarly, the price of the tool is also not a good predictor.

So, if you are OK with the uncertainty, you can buy a random (or, if you prefer, a well-reviewed) tool, try learning to use it, and if you are happy with it, stay with it. If you arrive at a point where the result is not satisfying for you, and you are either a) sure that the tool cannot do better, or b) you are not willing to invest more time in learning this tool, you switch to the next tool.

If certainty is more important to you, you can still go back to that whetstone, and invest the time needed to learn it until your knives come out sharper than you started. This is the same process as learning to do it perfectly, you will just experience success earlier, because you have more modest requirements.

What we can't do is to point to a specific sharpener tool and tell you "this will work well for you". First, I doubt that any of us has systematically researched different tools in all three dimensions to be able to tell where they fall on them, and second, even if somebody did, our site doesn't do specific brand/model recommendations. If you think reviews will be informative for you, you will have to look them up somewhere else, for example in test magazines or customer feedback in online stores.

Now to say a couple of words directly about things you stated in comments:

My impression was that for some knives, there is no option that does not require great skill but that for more everyday kitchen knives it is possible to get a reasonable result with something resembling one of the products I linked.

No, there is no such connection. Typically, if a tool gets a cheap dull knife slightly sharp, it will also get a good quality dull knife slightly sharp (again, with exceptions). It is just that "slightly sharp" tends to be unacceptable for people who buy the best knives, so they may express the opinion that it makes no sense to use these tools on their knives.

but then why are those products sold in supermarkets?

They are being sold because there are people who buy them, period. And all the ones get bought, both the good and the bad ones, because as explained before, as a buyer you cannot know which one is good and which ones is bad. When I said that these tools are all over the three-dimensional evaluation space, I meant it - some of them will always turn a dull knife into a duller knife, and no amount of practicing will change that. So, don't expect that just because there is a market for a tool (or even positive reviews) that it is good.


Based on the tests conducted by America’s Test Kitchen, an electric knife sharpener is probably the most effective and skill-wise the least demanding option.

  • 2
    I'd absolutely agree - however, a good one is going to be the best part of 200 bucks. I just checked your link & yup, that's the one I have. Highly recommended, highly-priced ;)
    – Tetsujin
    Commented Aug 23, 2020 at 12:15

Buy new knives.

There’s a very simple solution for having sharp, relatively cheap knives in your kitchen without having to learn any new skills or buy complicated, specialised tools: whenever your knives start to get dull, buy new knives!

  • I think you might not realize how quickly knives lose their “new” edge. And how poor cheap knives are.
    – Sneftel
    Commented Sep 30, 2023 at 8:39

the simplest thing I can do to make my knives better at cutting, preferably with equipment that's not too expensive and is easy to get hold of

Get a $10 honing steel and use it on properly-sharpened knives. It's simple to use, will dramatically stretch out the time between sharpenings and will give the best results while extending the life of your knives. There's a reason you see Iron Chefs like Zakarian and Norimoto constantly honing their knives during timed cooking competitions: the best results in less time!

I use my knives a lot more than most home cooks. I was tired of, frustrated by and injured using knives that didn't cut properly. I learned from web sites how to sharpen knives with a cheap set of water stones - contrary to popular belief, it wasn't difficult. But the real revelation was that frequent use of a honing steel brings the edges back to "razor sharpness" without the time-consuming and/or expensive sharpening that removes so much material from the blade. The "secret" is that the honing steel orients the material at the very edge of the blade, turning it into a micro-serrated cutting wonder.

A professional cook gave me a valuable insight: after honing with the steel, the edge is more effective on the pull stroke than on the push stroke. With a honing steel and this simple tip, paper-thin slices of a ripe, juicy tomato are flawless.


The "best" results will be with

…a set of whetstones, a steel & a strop.
This will take you time to learn, which is specifically excluded in the question premise.
… or a guided belt system.
This would be stupidly expensive.
…or a hand-held guided system.
This will be much easier to learn, but still requires somewhat more dedication that I feel you want to apply to the task.

The second best result will be with an all-in-one electric grinding system - a drag-through grinding wheel system not a belt-driven one. With one of these you cannot get the angle wrong; 2 or 3 grades of wheel can get your knives sharp, then keep them sharp without rapidly grinding the metal away. A good one, however, is still going to be a hundred bucks-ish. [A cheap one is a total waste of money - I had one, it was pants.]. My new one cost the best part of 200 [I had to pay the premium for a US one made for UK 240v] Yes, it's expensive, yes, it's fabulous, but yes I decided that's what I would go for after many years of trying to use other systems, with inadequate skill or inadequate results.
This is the one I ended up with - Chef'sChoice Trizor XV - which is specifically to bring EU 20° knives to 15° so you don't necessarily need one that posh;) they do cheaper 2-wheel 20° versions.
I arrived at this decision after many hours & days of research - during covid lockdown so I couldn't go out to actually get hands-on with any. It eventually became clear that all the reputable testers were using the Chef's Choice as their benchmark for comparison. I decided if they all have that as a benchmark… why not buy the benchmark itself.
In the time since I first posted this answer, Chef's Choice have changed their naming system. The Trizor XV is now just the 'Model 15XV' - There's a full listing here, starting at a 'mere' 95 bucks. You can also get these in 240v versions.

After that would be one of the myriad static drag-through systems like your AnySharp. This will, quite aggressively, rip a new edge onto just about anything you pull through it.
They are not subtle, but they will put a 20° edge on a knife.
They will, over time, start to produce a wavy edge on your knife. They will also really take off quite a bit of the blade's hardened edge each time. If you are using relatively cheap supermarket knives & not trying to make delicate sushi, then you may probably never care.

The edge this provides will also be quite short-lived, because there's no honing aspect. You can get drag-through honers, which you can use daily/weekly until honing no longer gives you your edge back - then you go back to the AnySharp one more time.
With a drag-through honer you need to be aware of what blade type they are made for. Japanese knifes & such as Kitchen Devil with skinny flexible blades are set at 15°. Regular European & US blades are set at 20°, so though one of those dinky little roller-wheel Kitchen Devil sharpeners would look the best deal, they're wrong for your AnySharp 20° edge.

BBC Good Food has a few alternatives of the spinny-wheel variety. I can't say I've ever had one I'd recommend as a "sharpener" but as a honer, maybe so.
There are also twin-slot pull-through systems, such as this Wüsthof which might just do the job of your AnySharp plus a honer, in one package.

Fancy electric, a dual pull-through system like the Wüsthof, or AnySharp plus a honer would be my choices, in descending order.

Quick guide to why you hone & what honing is - What's wrong with if you only sharpen, and never hone, your knives?

  • 1
    Sharpening with stones does not take years to learn. It might take years to obtain the skills to produce an absolutely picture perfect razor sharp edge, but it takes mere hours (with some instruction) to be able to put a reasonable edge on a kitchen knife. It is really not as hard as it is often portrayed to get a passable result, and you can improve your result by practice without getting more equipment. Commented Aug 25, 2020 at 8:46
  • 2
    The problem with this argument is it's always made by someone who has already learned how to do it. My counter-argument is I've owned some seriously expensive whetstones for 20 years or so, & I'm still rubbish with them. I've run the whole gamut of sharpening systems since about the mid 80s & ended up with an electric. It's the only one I get good results from [though I still have an idiot-proof honer I still use]. The way is littered with the ones I've tried & discarded [or kept in a drawer because they were too expensive to throw away.] BTW, the title of this question precludes new skills]
    – Tetsujin
    Commented Aug 25, 2020 at 8:56
  • 1
    I am not speaking from my own experience sharpening knives, but from my experience teaching my mom how to sharpen with stones. She generally is not very mechanically minded, but got the gist within 30 minutes or so. And the knives she practiced on were sharper afterwards than they were before. I am not disputing that it is more difficult than using a "drag-through" sharpener of some kind. But it also is not as difficult as it is often made out to be. Commented Aug 25, 2020 at 9:01
  • 1
    One on one tuition - that's got to help. Anyway, having faffed with whetstones on & off for 20 years, I'm obviously never going to learn. The OP, also does not want to learn a new skill & I fully agree with him that should not be necessary. This is therefore becoming a straw man argument, with no purpose. It is not there to help me improve my answer into something more appropriate to the question, it's just a "yes it is" "no it isn't".
    – Tetsujin
    Commented Aug 25, 2020 at 9:09

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.