I really like my new Vacuum sealer. However, I am having a lot of trouble keeping the top part of the bag totally dry & clean while filling it. It is my assumption that a good seal requires a perfectly clean rim.

To bag meat, I eventually resorted to putting the meat in another bag, putting the bag in the Vacuum Sealer bag, and shaking until the meat dropped into the Vacuum Sealer bag. This failed because the bag I used to get the meat into the Vacuum Sealer bag sometimes smeared the rim while I pulled it out. I also tried folding over the top 2". This failed because it put folds into the top of the bag and because I still got food onto the rim.

I would like to hear from others how they fill the bags. I am hoping someone has figured out a way to do so conveniently that keeps the rim perfectly clean.

  • 2
    What's the concern here? Is it that the sealer will fail to work properly, or that some material might be outside the seal zone?
    – BowlOfRed
    Commented Aug 18, 2021 at 18:00
  • 3
    Are you talking about bags that are heat welded? I just wipe the inside with a bit of paper towel. You don't want it to be wet or have bits of material but I've never had issues if I get it dry. I double-seal as well and look closely at the weld to make sure it's good.
    – JimmyJames
    Commented Aug 19, 2021 at 14:33
  • I agree with @JimmyJames. It doesn't need to be pristine to seal. Commented Aug 19, 2021 at 20:22
  • 2
    OK, so you folded it over.. outwards? But that means the surfaces that seal together can still get contaminated. How about folding it over inwards so the surfaces that will eventually seal aren't available to touch?
    – Caius Jard
    Commented Aug 20, 2021 at 8:16
  • @CaiusJard Good point! Brilliant in fact and so obvious in hindsight. I will be putting up chickens next Tuesday and plan to use your idea.
    – Bookaholic
    Commented Aug 20, 2021 at 9:33

8 Answers 8


I use a large french fry scoop as a funnel. It's shape slides easily into the bags and, because it's open on one side, it's much easier to remove it without having anything drip onto the bag.

  • Ordering one now. This might be the answer I was looking for. Thanks for the tip.
    – Bookaholic
    Commented Aug 19, 2021 at 13:33
  • Why have I never thought of this??
    – slebetman
    Commented Aug 20, 2021 at 8:02

It's hard to answer without seeing what your bags look like or how rigid the material is, but often it's useful to fold the top of the bag outwards over itself. Putting the bag in a suitable container or cup can also help keep things stable whole you fill it. This also makes it easier to wipe up any traces of food that aren't where you want them.

If you search online for methods to fill a piping bag you'll see illustrations of the basic method I'm describing.

  • 1
    Hi, I don't think your answer matches the situation. First, the OP already tried the folding part, and it didn't work. Second, with a vacuum sealer, unlike a piping bag, wiping is not really an option, the area to seal has to stay perfectly clean from the beginning.
    – rumtscho
    Commented Aug 18, 2021 at 7:56
  • 12
    FWIW, this is still the best approach, whether or not the OPs technique is faulty. The advice for comparing the filling of piping bags is also solid. You get an upvote from me. It is how I do it all the time. If this doesn't work for the OP, then maybe they should seek out a different style of bag, and work on being more precise when filling.
    – moscafj
    Commented Aug 18, 2021 at 10:53
  • 4
    @rumtscho In my experience, wiping the area works perfectly fine with vacuum bags. Commented Aug 18, 2021 at 17:57
  • 4
    As a more extreme variation on the folding (which is indeed correct), consider the "dog poop" method, i.e. mostly inverting the bag, using it as a glove, grabbing the food, and pulling it in. Maybe not the tastiest name for the approach but the most commonly used context for it.
    – Flater
    Commented Aug 19, 2021 at 8:24
  • 1
    @JPhi1618 and KondradRudolph: OK, then I must have been too cautious in my dealings with a vacuum sealer. Good to know it is not as critical as I thought! Had this been an answer, I would have edited it, but it is only a comment, so I guess it will stay like this, unless the discussion gets deleted.
    – rumtscho
    Commented Aug 20, 2021 at 9:11

I don't have a vacuum system, but when using ziplok type bags I use a wide necked preserve funnel for wetter items like soup or casserole, and improvise a temporary inner sleeve for things like chicken pieces or chops. So if I'm using a larger bag I might curl a silicone baking sheet into a tube and insert that into the bag mouth to hold it open and protect the edges, or for smaller bags I might sacrifice one bag by cutting the ends off to make it open at top and bottom and use it to line the top of the bag I am filling, protecting the surfaces which need to come together.

you can also find 'bag fill funnels' online.

  • A wide funnel is a good idea. You could also use metal rings used to cook burgers if they're deep enough, or even a tin can or plastic tub with the bottom removed (wash carefully and look out for sharp bits if using a tin).
    – Stuart F
    Commented Aug 18, 2021 at 16:14

I'm going to re-evaluate the assumptions on this one:

It is my assumption that a good seal requires a perfectly clean rim.

This hasn't been my experience. It certainly helps to keep the rim as clean as possible, but the biggest factor to keeping a decent seal has been the quality of the equipment.

The first vacuum sealer I had was a cheap one to see if the process worked for us. this was alright, but the heating element was fairly thin, which meant that any debris in the area caused issues with the seal.

That failed after about 6 months (mainly due to use). It showed that we used it, and bought one with more of an eye to reviews and value, rather than simple cost.

The new unit has a heating element that's maybe 5mm, rather than around 1, and that seems to give much more leeway. It'll still fail if the rim is too soiled, but a little care, and a wipe down is typically more than enough to keep it in check.


I like the freezing into pucks idea, for those things amenable to doing that.

To re-address the folding over the top of the bag approach, I believe I'm correct in saying that each time mentioned here, folks are saying "fold over the top toward the outside so an inch, say, of the inside now makes a rim facing out" (so a single fold) and the failure noted is that drippage/smearage can just as easily drip or smear on that "inside" (facing out) before even formally starting into the remaining bag (whose inside is still inside...) (where it also drips/smears, leading to the entire question).

Well, yes. But if you fold again, so now (using the inch fold over above) one has two inches at the top folded over with the first inch tucked up in between the second inch and the remainder of the bag.

Then drippage/smearage may very well happen on that inside-facing-out second inch as well as the remaining inside of the bag. But it won't happen (without a lot of help) to the first inch which is folded up to tuck between the second inch and the bag.

Protected like that, one would seldom see a problem just unfolding and sealing, but could though if careless in several ways. So before unfolding, a careful person could wipe the second inch and inside the top area of the bag, then unfold and handle the top inch in a manner that keeps it on the up side of gravity's influence so it remains clean. Nothing within an inch or two of it, should have time to seal before something runs up.

That said, I've also seen the vacuum pulling quickly draw rivulets of fluid toward it which might be the real concern here. But if one is not careless enough to allow that or situations leading to that, the double folding in "fold over, then fold that up under" would in any reasonable circumstance keep the leading edge, where the seal is planned, clean.


I use vacuum bags/sealers all the time. I don't use them for sauces or liquids. So I find even a very wide mouth funnel (like a canning funnel) too awkward to use. A big sloppy, marinated steak is not going to fit.

I'm not overly careful and will sometimes smear the top of the bag. It's sufficient to just take a cloth or a paper towel and wipe the sealing portion of the bag clean after everything is inside. You don't want a pool of liquid or a big mess, but it's not a problem if a touch of moisture remains.

Don't try to prevent it 100%, just clean it if any gets on the bag.


When you fold over the top you don't crease it. It's a lazy fold-over.

I use a 2L drink pitcher for my big bags if I'm sealing something especially messy like marinated meat. Lazy fold it over the pitcher lip, use a rubber band to keep it secured(could also use binder clips), then using tongs I drop the meat in. If there is anything on the bag on the lip or outside of the pitcher I'll wipe it down with a paper towel. If the items to be vacuumed are wet, I'll make sure to use the moist and/or delicate setting on my sealer.


If the food is a bit sloppy and I am afraid that the bag won't seal, I first freeze the food on a cookie sheet or in a muffin tin to make little "pucks". Pop the frozen (or partially frozen) food into the bag and vacuum seal it. Then there is never a problem with grease in the sealed area or liquid getting sucked into the vacuum chamber/pump.

A big sealing machine is also helpful as it can accept wide bags that are easier to load food into without contacting the seal area. I use a huge Cabelas vacuum sealer after burning through numerous cheap units.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.