I bought a Gyuto knife but now I am unsure what I can cut with it. The manufacturer says I shouldn't try to cut bones or frozen things with it, which seems clear to me.

But how about raw potatoes & sweet potatoes? They also can be pretty hard. And what about an avocado or mango where cut along the stone in the center of the fruit? Is a Gyuto the right tool for that?

Also, is it ok to firmly press garlic on the cutting bord with the side of the knife?

And what about the technique? I know how to use a Santoku or Gyuto with the "cutting motion", but what about chopping? Actually I thought all japanese knifes are made for chopping, but I heard someone that the blade can break.

Info about the knife: The center of the knife consists of VG-10 steel, coated with a chrome alloy. The blade is 24 cm long, HR is 60.

2 Answers 2


You can do anything with this knife that you would do with your santoku or Western-style chef's knife. These are real tools, and they are not especially delicate. It is certainly possible to chip the edge or tip (which requires an annoying amount of work to fix), if you drop the knife or, as the manufacturer warns, whack it against bones. This is a consequence of the relatively high hardness of your blade -- not of the fact that it's a gyuto -- but the flip side is that it should retain its edge very nicely for normal work. (A softer steel would end up with a rolled edge or dent rather than a chip.)

I guess that by "chopping" you mean quickly lifting and pushing the blade down through food so that it hits the cutting board. That's perfectly normal usage, and a plastic, wood, or rubber cutting board should not hurt your knife at all. (No glass! Do run it over a steel it often as you use it, though.) The foods you mentioned -- potatoes and fruit pits -- may seem hard, but they are much softer than the edge of your knife.

  • Nice answer, and +1 for NO GLASS.
    – JoeFish
    Commented Dec 3, 2012 at 21:14
  • 1
    Not all gyutos are suitable for honing on a steel. Commented Apr 22, 2017 at 15:55

VG-10 is a very versatile steel, which is exactly why it's popular with high-end chef's knives and gyutos.

You should be able to use the gyuto with most cutting techniques except:

  • Hard chopping - hard steel (even VG-10) is more prone to chipping, and gyutos are not really designed to support this movement
  • Cutting very hard products - Cutting a pit stone, or bone is not really what a gyuto should be used for. This will blunt the edge quickly or even damage it. By the same token, a marble or glass cutting board will cause the same effect on the knife.
  • Cutting movements involving high torque on the edge - Doing things like carving pumpkins or levering the pit out of a peach is not a good idea with any gyuto, because you risk fracturing the edge or screwing up the alignment.
  • Hard edges actually stand up to moderate chopping impact far better than european style edges, UP TO A LIMIT. That's how they are meant to be used. +1 for mentioning torque: forceful cross-chopping/mincing/walking is best left to european knives or thicker asian knives (sturdy cleavers, symmetric debas). Commented Aug 30, 2016 at 8:38
  • Also: A VG10 gyuto might be sharpened anywhere between 9/9degrees (Takamura out of the box) and 22/22degrees - which makes a substantial difference in what the edge will survive or not. Commented Feb 2, 2018 at 13:03

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.