6

I have a kitchenaid 6 quart stand mixer and a large family of nine. At the moment we're using coupons to buy biscuit dough, but I wanted to look at the time and effort to make our own. Not just for cost savings (though that would be nice) but more to control what we're actually eating.

Many of the better recipes call for the butter to be cut into the flour. I have a hand tool for this, but am unsure whether the paddle or whisk is best, or if there's another tool I should consider purchasing.

What tool should I use, and at what speed will best duplicate the process of cutting cold butter into flour without warming up the butter too much?

  • 1
    An alternative is to not use butter at all, but cream instead. Basically, equal parts of heavy cream and self-rising flour by weight stirred together until lumpy, and then drop them in 1 oz portions on a baking sheet. Brush with more heavy cream and bake @ 450 F for about 10 minutes. – Batman Jan 5 '17 at 23:01

10 Answers 10

10

Since you ask about other tools, I recommend avoiding the mixer altogether and instead grate frozen butter into the flour. If you have a food processor you can use the coarsest grating blade--chilling the bowl and grater first will help keep the butter cold will help--but it goes quickly by hand with a coarse grater.

The key is to get the butter distributed quickly and keep the butter and dough cool while working the dough as little as possible. If you do use the mixer, chilling the bowl and paddle helps.

And, regardless of method using ice water and very cold liquids helps.

8

The paddle should be used for this. You'll want to do it on a lower speed, probably no higher than 2 or 3. You'll have problems with the flour flying up before you have trouble with the butter melting. It will also help to chop the butter up some before putting it in.

4

Instead of a mixer, I use a food processor (Magimix) with a steel knife.
It's the fastest way to blend cold butter with flower without heating and melting the butter.

Note that a mixer will probably heat the butter because more energy must be applied to squash the butter than to cut it.

  • 1
    Is this common around here to down vote without explaining? My answer is legitimate, even if it's pointing at other, (much better IMO) alternative than the question asked for. – Amir Uval Jan 19 '14 at 0:40
  • 1
    It's often polite and helpful but never required to explain voting, and we'd rather people feel free to vote even if they don't have time or wish to explain than for them to not view at all. I can't read the anonymous voter's mind, but perhaps they found your answer not useful because you didn't actually answer the question as asked in the title. Or perhaps it was mentioning the heating - while it's probably true that the mixer will heat the butter more, it's because it takes longer, not because of mechanical energy being turned to heat, and it's probably not enough of a difference to matter. – Cascabel Jan 19 '14 at 8:31
  • @Jefromi - thanks! Naturally everyone is entitled to have different opinions, and I welcome debate in the aim of education - myself as well. Anonymous down vote is in my opinion contrary to this approach, as it is just being a bully. Intimidate people from speaking up is bad. (And about heating the butter - you're right - longer time leads to higher heat - but also what I've said is perfectly true - mechanical energy is transformed to heat). – Amir Uval Jan 19 '14 at 12:08
  • 1
    It's not bullying. It's helping get answers ranked in the right order, on average. You may or may not have deserved this particular vote, but that doesn't mean anonymous voting is bad. The site is designed that way - your votes are private. See also meta.stackexchange.com/questions/135/… and meta.stackexchange.com/questions/121350/… – Cascabel Jan 19 '14 at 15:42
  • 2
    As for mechanical energy: yes, it does of course get transformed into heat, it's not going to be a significant amount compared to the other heating. What you've said is perfectly true, but also insignificant. – Cascabel Jan 19 '14 at 15:45
4

Dice the butter and use the paddle attachment, as sourd'oh recommended. The paddle will break up the butter some, but more importantly will 'squish' the pieces, making them thinner and flatter. That will layer the butter through your pastry, making it flaky. This is similar to the effect of coarsely grating the butter, but will create a good shape and mix the pastry at the same time. You won't mix as fast this way as with the whisk or a food processor, but it's still hands-off and you'll get flakier results.

2

Well, I have to go against what sourd'oh said, I like the whisk attachment for cutting in butter. I have owned two kitchen aid's in the past and they both had nice solid whisks with thick wires that worked great for cutting in the butter.

And to go with the heat theory that uval mentioned, a whisk has much smaller surface area hitting the butter and so is not smashing the butter as much as a paddle would.

As a side note, I now own a Delonghi stand mixer, and I do NOT use that whisk attachment for cutting in butter because it is much to then/easily bendable wires.

2

I'm going by what kitchenaid says and yes you can. Use the paddle and the lowest speed.

2

Back in 1976, when I was in culinary school, we had a tabletop Hobart and to Hobart floor mixers. They each had a pastry blade attachment. Depending on the mixer, we could make pie crust and biscuits to feed 4 or 604. I'm not sure Hobart even makes them anymore. I suffer deeply from the same dilemma as you. I keep looking for a KitchenAid with a pastry blade. Maybe if we home pastry chefs whined and cried to the KitchenAid designers, they will design one for us, putting an end to our cullinary woes.

  • It looks like a bent paddle without the middle webbing, going from internet pictures. – Adam Davis Dec 7 '16 at 1:42
  • @AdamDavis Do you think this answers your question? It seems like suggesting a product that doesn't exist is less than helpful, but perhaps the similarity to the paddle makes it into an answer? – Cascabel Dec 7 '16 at 1:44
  • 2
    @Jefromi It's useful to know that another mixer has the desired attachment, and does lend some evidence that the paddle blade might be he correct choice for my specific mixer. – Adam Davis Dec 7 '16 at 2:05
  • When "pastry blade" is said... is that equal to what I know as a "dough hook"? – Paulb Jan 6 '17 at 2:03
1

I've used an electric hand whisk with the whisk attachments. That works. The strips of metal making up the whisks were flat, cutting through the butter as they went round. It might not work as well if the whisk attachments were rounded.

0

I use the paddle at the lowest speed.

The Kitchenaid K5A (the model I have) is nearly identical to a Hobart made before Kitchenaid bought out that product line from Hobart. I bought mine in '75.

0

For cutting cold butter into flour one can take a piece of cold butter and grate it using the cheese grater box with small holes in it (but it requires little more effort). Another way is to use the food processor, pastry blender or dough blender. I have used the pastry blender which works great for me.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service, privacy policy and cookie policy

Not the answer you're looking for? Browse other questions tagged or ask your own question.