I have found a cast iron grill manufactured by the French company Le Creuset. This cookware is probably around 20 years old and you can see a picture of the same model below.

enter image description here

I'm wondering if this grill is enameled cast iron or raw cast iron. Indeed, if it's raw cast iron, I will strip of the former seasoning and create a new one. If it's enameled cast iron, I'm not sure how to deeply clean it but I will not put it in my self-cleaning oven.

Today, all cast iron products from Le Creuset are enameled but I don't know if that was the case 20 years ago. The cookware is black and has been used a lot, so I don't know if the (quite) smooth aspect of the top is enameled or not.

Do you have any tricks to recognize if cast iron cookware is enameled or not?*

Photos (click for full-size)

enter image description here enter image description here enter image description here enter image description here

On this last one, you can see "Le Creuset * Made in France* D2" but I didn't find anything about D2 grill model on the internet.

5 Answers 5


Enamel is a ceramic coating applied to the metal - it will typically be colorful and glossy-smooth to the touch. Raw cast iron will be black and matte in appearance, the unseasoned surfaces rough to the touch, the seasoned cooking surface will be smooth and a tiny bit greasy. Complicating things is the "black satin" enamel some manufacturers (including Le Creuset) apply to some of their pans to mimic a well-seasoned raw cast iron pan.

From the photo, you have a raw cast iron grill pan - we can tell, as it has been misused and the seasoning mostly removed. The coloration, going from black to grey, almost white, indicates the early stages of oxidation and rough scrubbing, and parts of the raised grill-ridges have likewise been polished from rough use.

While enamel can stain and discolor from use (Le Creuset calls this a "patina"), it's failure state does not include a metallic shine in places, and does include cracking or flaking. The glossy black bits stuck to the ridges are seasoning, and ideally should cover most of the cooking surface - if it were uniform across the surface of the pan, it could be enamel. As is, it's a great raw cast-iron pan begging to be restored with a good cleaning and re-season.


We're going to do all of our analysis on the back side, so we don't mess up any cooking surface:

  • if it's rusted : not enameled (or possibly damaged enamel)
  • if it's greasy, clean w/ hot soapy water and a scrubbing pad, just in the middle of the pan.
  • if it's any color other than black, brown, bare metal or orange-brown : enameled
  • look for a model number, then look it up online

... that should get you though 99% 90% of the cases ... if that still doesn't help:

  • run your fingers over the cleaned surface
  • if it's rough : not enameled (or someone polished the surface ... which is rare, but not impossible; also beware of more recent 'satin enamel', but that's typically an interior treatment)
  • if there's signs of crazing (tiny cracks all over the place; not sure how obvious it'd be w/ black enamel) : enameled

If you're still not sure after that, I guess post a picture, close up of the cleaned back side, with good lighting.

  • 3
    No, it won't help for 99% of the cases. Le Creuset frequently uses black enamel, sometimes over a slightly rough surface. Not as rough as naked cast iron, but a person has to have touched both a seasoned cast iron and this thing to know the difference. I'm not even sure I'll know it without samples for comparison, or after the pan has been cooked in.
    – rumtscho
    Commented Oct 15, 2014 at 12:57
  • 1
    @rumtscho : I guess the black enamel is more popular in europe ... you rarely see it over in the US (red, blue, or other bright colors are more common here). As for the roughness ... when people season pans, you don't get a smooth surface unless you also scrape it with metal ... so the back will have undulations in it, even if seasoned ... but you're right, having an seasoned and emaneled pans to compare to on hand would help.
    – Joe
    Commented Oct 15, 2014 at 13:03
  • 2
    @rumtscho - Amazing, but true! I had to delete my answer after double checking your comment. Le Crueset and some other European manufacturers use a black "satin enamel" that mimics raw cast iron on skillets and grill pans. These are not common in the US, but it's definitely something to watch out for! Commented Oct 15, 2014 at 13:08
  • 1
    @Joe my worry wasn't that the iron might be smooth (although this is a possibility too), but that the enamel will be rough. I have touched enameled Le Creuset pans on display, they have a coating which is black and slightly rough, mimicking seasoning, but it is enamel, not seasoning. This is probably what RI Swamp Yankee found under the name "satin enamel".
    – rumtscho
    Commented Oct 15, 2014 at 13:36
  • 2
    @Joe - The inside, on the cooking surface. It's designed to mimic a seasoned raw cast iron pan. Why, I can't even guess - in the US, Le Crueset and those copying them generally use a white enamel on their skillet's cooking surfaces. I haven't seen one of these "satin enamel" pans in person, but the picture on Le Crueset's site indicates the edges are unenameled, but you'd really need to see one up close to determine if this is the case or not. Commented Oct 15, 2014 at 14:25

You can easily test whether a piece of cast iron is enameled or not with a multimeter. Set the meter to resistance measuring mode (e.g. on the megaohm range) and (carefully) stick the probes across the pan.

Bare cast iron is electrically conductive, and will have a resistance of close to 0 ohms. The enamel on an enameled cast iron pan is an insulator, and the resistance will be near infinite.

Of course, the seasoning on a cast iron pan may add some resistance. I tested this with an enameled pan (resistance >10MOhm) and a brand new bare cast iron pan which came "preseasoned" from the factory, which measured around 300 Ohms over a stretch of several centimeters. I suspect using sharp probes and digging into the metal a little bit would help lower the resistance, but that would damage the pan and just making gentle contact is enough to determine whether there is enamel or not.


Apply a really weak sheet magnet to the surface of the pan, like the ones that come attached to the phone book for hanging on your refrigerator. If it sticks, it's not an enameled surface. If it does not stick, there's a film of enamel there preventing it from doing so. Just be sure and test it first to make sure it sticks to the frig.

  • Nice idea! Maybe also test it on something known to be enameled cast iron to make sure it doesn't stick, though? Fridges usually have coatings over the metal too (except shiny stainless steel ones) so I'm guessing a lot of things that stick to the fridge would stick over enamel too.
    – Cascabel
    Commented Oct 21, 2014 at 21:30
  • I agree that magnets might be a bit too strong. I wonder if magnetizing a needle and trying with that instead would work better?
    – Kareen
    Commented Oct 21, 2014 at 21:42
  • 1
    The enamel coating isn't that thick so I doubt this would be a good technique to use. Magnets stick without being in direct contact; e.g. using a magnet to stick a piece of paper to the fridge (which may have paint or a veneer)...
    – Nick T
    Commented Mar 19, 2020 at 2:35

After seeing the pictures, I'm almost sure this is naked cast iron. "Almost", because I haven't seen the satin enamel after use, only on new pans. But when it's new, it's glossy like seasoning, not dull like what your pictures show.

For a confirmation, you can try to rust a small spot. Take a drop of acid - maybe essence of vinegar, or descaling agent - put it on the pan, and heat. If it changes or even rusts, it is unseasoned iron. This test won't work to distinguish between oil seasoning and enamel, but it should work on pure iron. But you'll have to derust it before seasoning again, so it may not be worth doing it.

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.