I've been following the Serious Eats recipe for Neapolitan pizza dough(exception I use bread flour), and cooking it on a baking steel. I cook it at 550 degrees(preheated for 1hr) for 2mins exactly, very near the heating element at the top of my oven, with the broiler set to high.

I do not use 00 Flour "Tipo". Instead I have been using bread flour. This is for a few reasons. I have learned that 00 Flour works well above 700 degrees, which I do not have. And it also has a much higher cost for me.

The crust comes out with nice char both on the top and bottom. The toppings are cooked well too. What I don't end up with is a nice soggy crust that I prefer in Neapolitan style pizza. Instead the crust is quite crunchy near the center and could easily stand up to tons of additional toppings(not my preference). The cornicione(edge) of the pizza is puffy, full of bubbles, and somewhat chewy. I'm quite happy with the cornicione but the center should be floppy/soggy/wet and I'm not sure how to achieve that, or if I can at all without a 900 deg wood fired oven.

Some wonder why I would want a soft, soupy, soggy center of my pizza. Having that is one of the main characteristics of Neapolitan pizza. I thoroughly enjoy using a fork and knife to cut and then scoop up the gooey amalgamation of favors in the middle of a fresh pie. As stated on Serious Eats:

Unlike a crisp-crusted New York-style or hefty Deep Dish Chicago-style pies, a Neapolitan pizza will have a soft, tender, nearly soupy center. Some folks find this off-putting. I personally like the sauce, oil, and whey-soaked bits of tender crust that form down in there, and I'll fight my wife for my share of it.

This is what my pizzas look like currently:

enter image description here

  • Sorry, no such tag. Commented Nov 6, 2014 at 4:52
  • neopolitan-pizza tag added.
    – GdD
    Commented Nov 6, 2014 at 8:50
  • 2
    OMG That looks awesome.
    – Jolenealaska
    Commented Nov 7, 2014 at 2:12

5 Answers 5


It sounds like you're doing several things differently than the recipe (different flour, different temperature, different baking surface...) though I don't actually see shaping/baking instructions on the recipe you linked. If you want to stick closer to that recipe (than the other answers...), here's a few other thoughts of potential problems and a few things to try to alleviate these potential problems.

  • Baking too quickly or overcooking. the baking steel will transfer heat more quickly than a baking stone, a perforated pizza pan, or a sheet pan. Try one of those other baking surface options if you have them, or preheating your steel for a shorter period of time, or cooking for a shorter period of time.
  • Different flour. doppio zero flour is (likely) much more finely ground and more highly refined than your bread flour; these differences will impact how your bread behaves, such as water absorption and retention (in addition to the temperature comment you made). You might want to try increasing the water, to see if that does something you like (this recipe is about 65% hydration, so you've got some room before the dough gets really sloppy). Bread flour and 00 flour will (likely) have similar protein content, but you could check that from the respective producers, also. Despite your cost and temperature concerns, have you tried 00 in this recipe just once to see if there's a difference?
  • Shaping. Looks like you have a system, but perhaps you've got the dough just a bit too thin in the middle? Might be worth making the center slightly thicker as a test. Also might want to try making one a bit bigger.
  • If you're cooking one at a time, try cooking two at a time. They'll each be absorbing some heat, so baking will happen slightly more slowly.

Other questions:

  • are you indeed letting the dough ferment and rest for this long? 8-12 hours of initial ferment seems uncommon for conventional yeast. I've seen this long initial mix-and-rest for a (no-yeast) autolyse step, or for (very) sour sourdough. I wonder what the intended effect is...
  • I'm also surprised there's nearly zero kneading; gluten development will be... different. It seems like the dough will be lumpy, and the gluten development wouldn't be as uniform. Or, perhaps after 2.5 days fermentation this is enough time to have the dough work itself out on its own. The "bread in 5 minutes per day" franchise also suggests multi-day fridge storage, so I think this is probably a good thing in this case.

Looks good; I think I'll have to try this. Good luck! Post back if you discover some improvements...

  • Great answer thank you. Yes I have let it both cold ferment in the refrigerator for 3 days and also a different time on the counter for 1 day. This is why the recipe can get away with no kneading apparently. I like the ideas of a thicker crust in the center and also experimenting with 00 flour, both things I haven't yet tried with this recipe. I'll update after some attempts. Thanks!
    – dpollitt
    Commented Nov 7, 2014 at 13:16

Sorry to dig this up months later, but it's a great question, one that I've struggled with also. I have baked pizzas in a 700-800F wood oven, and had the same complaint: beautiful coloration, decent spring, but not moist enough. I'm using dough that's much closer to the Tartine method hydration level than typical pizza dough, so I don't think that the answer lies in just upping hydration, although it might help.

Instead, I have looked at two ways to improve: topping moisture and shaping.

It's hard, and expensive, to get really nice mozz here (in the states). Think about the fancy imported mozzarella di bufala: wet, hardly chewy at all, very milky. It's not what most Americans even think of as mozz. I don't know what kind of cheese you're using, but in my experience, it's hard to go too wet on the cheese in imitating pizza napoletana. I've had better luck just subbing a soft triple cream cheese if I can only get dry chewy mozz. Also, the traditional sauce is crushed raw tomatoes. Not cooked at all - again, much moister than what Americans typically put on pizza. This is a cheaper way of changing the toppings to include more moisture.

Also, I got a clue from Una Pizza Napoletana, where I've had the best version of pizza in this style that I've ever eaten. There's a video on their homepage with some brief glimpses (starting at 40 sec) of Mangieri (chef owner) shaping pies. I was surprised mainly by how big his dough balls are. Those have got to be 8-10oz beasts, and he's making pizzas 12" across from them. There's clearly a lot of dough getting left in the cornicione. Also, his dough doesn't look particularly proofed. I've incorporated some of these things with results moving in the right direction.

All in all, I think there's a reason that this style of pizza is so highly regarded. It's damn hard to make! The pie you pictured is gorgeous, and 99% of people would say it's near-perfect. What makes pizza napoletana different is that at its best it's like a pizza and fresh-out-the-oven loaf of bread rolled into one. Getting the chewy steamy bread part is hard; I hope a bit of this helps.

PS I'm not making perfect neapolitan pies by any means, just aspiring as well! Good luck!

  • 2
    Have to agree with this analysis much more than the other answers, particularly regarding topping choice. A 2-minute bake at 550F shouldn't be enough to dry out the center of a pizza unless there's not enough moisture there to begin with. I actually make (pseudo) pizza napolitana in a very similar way, except the only thing I don't like about classic Naples pizza (even in Naples itself) is pizza that's too "soupy" in the center. I avoid that at home for my personal preference, but it's very easy to achieve accidentally if I use wetter ingredients.
    – Athanasius
    Commented Feb 7, 2015 at 2:00

I'm also a lover of so called "Vera Pizza Napoletana". By coincidence, I made yesterday this Neapolitan Pizza style using this Serious Eats method. Also see this step-by-step instructions.

It's all about heat capacity, conduction and radiation. You don't need a 1000°F oven to bake your pizza because doing it on a skillet will have almost the same effect since it will deliver more heat at lower overall temperature. The stainless steel and aluminum core of a good skillet can both hold significantly more energy and better at conduct that energy into the bottom of a pizza.

  1. Preheat a skillet until 500°F, if you don't have a thermometer follow this tip:

a drop of water dropped on its surface forms a bead that skids around

  1. Transfer the stretched dough to the skillet and cook it around 1 minute, flip, cook a little more and burn the "cornicione" on direct flame of the gas burner.

  2. Transfer it back to a clean surface put the topping, in this case tomato sauce, mozzarella and basil leaves.

  3. Transfer it back to the skillet at low-medium heat and cook it until mozzarella is melted, but still soggy.

It's incredibly easy to do and the outcome is very good.

I think that baking at lower temperature will do the opposite effect. Lower heat will dry out your pizza. If you want it soggy, you want high heat to cook the dough before the fillings dry.

  • 1
    So you are suggesting the skillet method over the baking steel to gain a soft/soggy center to my crust? And the reasoning is because of the higher heat? My understanding is that the baking steel is even better than the cast iron at retaining heat and should perform even better(and it does in my tests). So I'm not sure what exactly you are proposing here that I'm not already doing.
    – dpollitt
    Commented Nov 7, 2014 at 13:00
  • 1
    @dpollitt : the baking steel will have higher thermal mass, but at a lower temperature. It may affect how quickly the outside browns relative to the center of the dough fully cooking. Don't discount it until you've actually tried it. (I can't do the comparison myself, as I don't have a baking steel).
    – Joe
    Commented Nov 7, 2014 at 14:34
  • 1
    Joe - I've been using the skillet/broiler method for about a year and just recently switched to the baking steel. So I am not discounting it without trying. Overall the baking steel is far superior to produce this style of pizza so far for me. The only overall characteristic I'm missing is the soggy center. The skillet had numerous other issues for me.
    – dpollitt
    Commented Nov 7, 2014 at 14:36
  • @dpollitt the skillet worked fine for me. For sure the baking steel can retain more heat, but it's important to understand what is the amount of heat energy. The stainless steel and aluminum core of a good skillet can both hold significantly more energy and better at conduct that energy into the bottom of a pizza. I think that cooking the dough first and topping it after will let the pizza soggier.
    – Johnny
    Commented Nov 7, 2014 at 17:54

Perhaps this is an obvious answer - but if your center is too dry, add moisture. If you're happy with the edges and the rest of the pizza, then meddling with other variables (like time, temp, or flour) might disturb the things that work - a possibility to keep in mind for if smaller adjustments don't work, but not my first adjustment.

For myself, when I want to adjust moisture in a recipe, my first go-to is to sprinkle water in it. Low tech, but it works for me - it promotes a beautiful melting in slightly drier cheeses, and keeps crusts from drying out (my typical problem). Maybe sprinkle a tablespoon of water over the pizza, or maybe splash it right down over the center, or maybe precisely eyedropper the water just where your want it (depending on your textural preferences). You can add the water while the pizza is being assembled (for hydrating ingredients), or just before you bake (for a slightly less cooked center), or after it is taken out of the oven (for general sogginess after it has been cooked properly).

After that, evaluate the difference and tweak accordingly. Maybe you need more water, or to soak individual ingredients pre-assembly, or sprinkle over the top more evenly, or place a puddle of water on your serving plate, for it to sog up the bottom crust center after the pizza is placed on it. Maybe you want a little more flavor, and would like to try sprinkling milk instead of water - or you want to add a little more oil to the center. Maybe the introduction of wetter ingredients (like Gabriel Saunder's suggestion of cream cheese instead of, or as well as, the mozzerella) will help, or you want a moister sauce.

After that, you might discover other tweaks that improve your recipe, or that you want to try a bigger change (like the aforementioned time baking, temperature, and flour type). You might find all your problems are solved with an eyedropper of water (or other liquid) at your workstation.


I'm not sure why anyone would want a soggy crust, however if that's what you want lose the baking steel. The reason for using a steel or stone is to give you a crunchy crust, try using a baking tray instead.

Also, you can try baking at a lower temperature, not a higher one. Lose 100F on the oven and you're more likely to get sogginess.

To me it sounds like you are doing it right, not wrong. Soggy - why?!

  • I've updated my am question to address the "why?". Thank you for the answer, although I'm not convinced that your answer is accurate as all of the best Neapolitan pizza I've ever had has this characteristic but is also cooked at 900 deg F too.
    – dpollitt
    Commented Nov 6, 2014 at 9:29
  • @dpollitt Maybe they had wetter dough or toppings then? Yours looks pretty dry on top too.
    – Cascabel
    Commented Nov 6, 2014 at 15:09

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.