# How to increase the temperature of my double boiler?

I have a double boiler that I wish to use to prepare a batch of fudge. The recipe I am using calls for heating to 240°F (=116°C), but a double boiler is limited to the boiling point of the working fluid used, so plain water, boiling at only 100°C, won't work.

I know that one can increase the boiling point of a liquid by dissolving material in it, governed by ∆T = Kb m, where Kb is the boiling point elevation coefficient and m is the molal concentration of solute.

Using this, to get the boiling point of water to 116°C requires a ∆T=16 K, and Kb = 0.512 K / m, so that would require a 31.25 molal solution. Using NaCl, that would mean about 1.8 kg of salt per kg of water, which is around 5 times as much salt as will even dissolve at all.

What can I do to increase the temperature of my double boiler?

• To move it that far, you'd have to use some other liquid, as a fuly saturated brine will only get you to 108°C / 226°F. Unfortunately, you'd have to find something that was food safe and didn't cause irritation in gaseous form. Another option might be to try using the oven, rather than the stovetop. (to at least get it close, then finish on the stovetop, watching it like a hawk?) – Joe May 10 '15 at 17:44
• Why do you specifically want to use a double boiler for this application given the inherent temperature limitation? – logophobe May 10 '15 at 20:33
• Sugar solutions (sucrose/water) will get you there. Soft ball stage runs about 115 °C: craftybaking.com/howto/candy-sugar-syrup-temperature-chart Can't find a decent table of BP°C vs percent sugar today, or I'd make this an answer. – Wayfaring Stranger May 10 '15 at 20:57
• @WayfaringStranger I wouldn't try to make a sugar-solution double boiler. The problem is that a suger solution's temperature is not limited, and once they start supersaturating, they spend very short time at each temperature, frequently even less than the reading delay of a sugar thermometer. You can certainly take a sugar solution to 115 C, but you cannot hold it there for a prolonged time without some complex apparatus (which would have been capable of doing the double boiler duty in the first place). – rumtscho May 11 '15 at 8:48
• @rumtscho Agreed, now that I think about it. If you really want some oddball temperature, you're better off with a precisely thermostatted heating plate. – Wayfaring Stranger May 11 '15 at 12:46

## 1 Answer

While I personally appreciate your scientific approach to this, I think this concept is fraught with peril. :)

For the acute application of a double-boiler to fudge: don't. Fudge is sugarwork/candy! Managing the heat and temperature over direct heat is part of the fun and peril of sugarwork in general! logophobe's "why" is on-point. You want to boil-off a fair amount of water in making fudge; indirect heat like a double-boiler probably isn't a good choice for that.

If you're interested in another take on the science of fudge, I recommend the fudge episode of Good Eats.

For the actual question of making a double-boiler work at much higher temperatures: I think you'll want a different (non-water) substrate. But unless you've got something with exactly the right boiling point, it's not going to automatically regulate the temperature any better than direct heat, and that entirely defeats the purpose of a double-boiler. You could try regulating something like vegetable oil at the correct temperature; perhaps there's an electronically-regulated temperature-controlled deep fryer or something that has a temperature setting in the low-100C/200F range, but most frying is in the 175C+/350F+ range.

As an aside: As pertains to Wayfaring's recommendation from comments to use sucrose syrup: Keep in mind that fudge is in fact itself candy / sugarwork at soft ball stage. Unless I misunderstand, I strongly believe that you do not want to use sugar syrup in the bottom vessel of a double-boiler. While clever, this solution will soon exceed the temperature you want to achieve, then in the worst case boil-off all the water and burn. Wayfaring's link is a good one and does contain percentages: sugar temperature chart; another from FAO has a more concise percentage chart by weight. Kb for water is 0.512°C/m ; more here. For any substance in the bottom of a double-boiler, you're going to be boiling-off some of the water, making higher concentration of whatever solute. That is, your boiling point is going to keep creeping up.

• The more expensive immersion circulators can circulate oil at temperatures above 100°C, and of course hold that temperature very accurately. – derobert May 11 '15 at 21:28