What are the mechanics of water boiling over? How can you stop it from happening? Is it more likely to happen with certain ingredients? Which? How does the amount of water effect the likelihood of water boiling over? What role does burner temperature have? Will it only occur during a rolling boil?

This is brought up by this comment by MeltedPez in one of the cooking pasta questions:

The only other argument for using more water is that less water is more likely to cause the pot to boil over. Basically the starch in the pasta makes it easier for the water to form bubbles that collect and spill over when not paying attention. I've found that with a very low pasta to water ratio can end in a messy kitchen.

This seems very counter intuitive to me initially, as I feel less water should make it harder to boil over the edges.

  • When I use a smaller saucepan adding salt or pasta to boiling water creates a water explosion. I have to use a large pot to avoid it.
    – user20640
    Commented Oct 8, 2013 at 23:34

3 Answers 3


Adding a starchy substance such as rice or noodles to boiling water increases the surface tension of the water. When it's just plain water boiling the surface tension of the water can't hold back the force of the steam rising and the bubbles burst. Starches increase this surface tension making the bubbles more elastic/pliable (essentially creating a foam), thus requiring more force for them to burst. This makes the bubbles last longer which allows them to build up and eventually boil over.

It's more likely to occur with anything starchy like rice and pasta.

A lower temperature should help to control a boil over as it will allow the water to cool somewhat and slow the boil.

I'd assume that, from your quoted text, that if you use less water you're still imparting the same amount of starch making a thicker solution. More water would dilute this and bring it closer to normal water. In my own experience, small amounts of water allow lots of bubbles to form but nothing really boils over, it just splatters a bit. But reducing temperature and tilting the lid to let some air in has helped me in the past.

  • +1 good answer. That explains why potatoes seem likely to boil over too!
    – yossarian
    Commented Oct 7, 2010 at 14:59
  • 6
    a tea spoon of oil on the top of the water reduces the surface tension back down. I always put a but of olive oil in the pot when I cook pasta.
    – vwiggins
    Commented Oct 8, 2010 at 12:40

Add a pea sized dab of butter or margarine next time.

  • Hi, welcome to Seasoned Advice. While short answers are sometimes helpful, well-researched answers that address the question directly are usually better. The Help Center is a good place to learn what makes a good answer. Commented Jan 16, 2015 at 0:43
  • @JasonSchock : This is the reason that some folks say to put oil in the water -- it makes it more difficult for bubbles to form, decreasing the chance of boil over. Of course, this doesn't actually answer the question of why. For how to prevent, the correct place to put this is cooking.stackexchange.com/q/46384/67 .
    – Joe
    Commented Nov 19, 2016 at 23:50

A small amount of salt will raise the boiling point of water, giving a bit more leeway.

  • 2
    Are you sure? I was under the impression that adding salt had a fairly insignificant effect on the boiling temperature.
    – yossarian
    Commented Oct 8, 2010 at 12:57

Your Answer

By clicking “Post Your Answer”, you agree to our terms of service and acknowledge you have read our privacy policy.

Not the answer you're looking for? Browse other questions tagged or ask your own question.