Just as a prelude, I've heard these referred to by a huge number of terms: "waiter's friend", wine opener, combination corkscrew... on and on.  I'm going to call it a **wine key** below simply because that's how I first heard it described.

I have always found hinged versions to be much easier to use, and they do help with rounded tops as you describe here.  It's actually fairly easy to illustrate why.

Here's opening a bottle with a "single-piece" wine key:

![single-piece][1]

Notice how the lever contacts the lip of the bottle at an angle?  For most bottles, that's not a huge problem, but if that lip is significantly rounded, the lever won't be able to "catch" properly and will slip off when you try to extract the cork.  Sometimes you can manually hold it into place (as this guy appears to be doing) but that's tricky at best.

This is a less significant issue with hinged wine keys, because the hinge allows you to press the first lever into an angle much closer to 90 degrees:

![double-hinged][2]

That helps the lever stay mounted while you pull up on the handle to partially extract the cork, and once you've made it this far there's typically much less resistance.

The hinged version is also just easier to use - because the levers are shorter, the actual corkscrew can be placed closer to them.  The entire wine key is really just a [second-class lever][3], and what this does is move the load closer to the fulcrum, which increases the effectiveness of the handle's motion.

For what it's worth, nearly all the professional waiters and sommeliers I've known have carried and used double-hinged wine keys (most bartenders too, but at places which serve primarily beer and where there's little use for a corkscrew, many will opt for a simple [flat bar][4] instead).  There were only a couple of exceptions, and in nearly all of them the corkscrew was a gift and used more for sentimental value than ultimate practicality.

In fact, the overwhelming number of those people carried [this exact model][5], which is simple, cheap, and very durable.  I myself have at least two of them (probably three) floating around the house; at least one of those is over 15 years old, and shows little signs of wear even after being used for years during my stints as a waiter and behind the bar.  I can't think of a single other service tool that I'd recommend so highly.


  [1]: https://i.sstatic.net/JAHOY.jpg
  [2]: https://i.sstatic.net/RShID.jpg
  [3]: http://en.wikipedia.org/wiki/Lever#Classes_of_levers
  [4]: http://ecx.images-amazon.com/images/I/31ZG6Di6DNL._SY355_.jpg
  [5]: http://www.amazon.com/Wine-Enthusiast-Pulltaps-Double-Hinged-Corkscrew/dp/B0000AV1B9/