Skip to main content
Seasoned Advice

Return to Answer

edited body
Source Link
Sneftel
Sneftel
  • 32.3k
  • 3
  • 82
  • 114

Use a rubber spatula to scrape the mixture off one side of the paddle. (For a head lift mixer, do this on the "uphill" side.) ThemThen use the spatula diagonally in the holes, pushing the remaining mixture through the holes onto the unscraped side and off the paddle. The idea is for the mixture to fall out/off in clumps.

Use a rubber spatula to scrape the mixture off one side of the paddle. (For a head lift mixer, do this on the "uphill" side.) Them use the spatula diagonally in the holes, pushing the remaining mixture through the holes onto the unscraped side and off the paddle. The idea is for the mixture to fall out/off in clumps.

Use a rubber spatula to scrape the mixture off one side of the paddle. (For a head lift mixer, do this on the "uphill" side.) Then use the spatula diagonally in the holes, pushing the remaining mixture through the holes onto the unscraped side and off the paddle. The idea is for the mixture to fall out/off in clumps.

Source Link
Sneftel
Sneftel
  • 32.3k
  • 3
  • 82
  • 114

Use a rubber spatula to scrape the mixture off one side of the paddle. (For a head lift mixer, do this on the "uphill" side.) Them use the spatula diagonally in the holes, pushing the remaining mixture through the holes onto the unscraped side and off the paddle. The idea is for the mixture to fall out/off in clumps.