I have recently made some home pressed olive oil but it is quite cloudy and I wanted to filter it so it will keep longer and be a bit more pleasing to the palate and the eye. I initially used a muslin (ham) bag in a steel colander over another steel bowl and weighted down with 70kg of gym weights to press. I was wondering if it is effective to try running it through paper coffee filters to get rid of the fine particles?
3 Answers
I have picked and processed hundreds of kilos of olives for oil. I store the cloudy oil in plastic water bottles in a dark cupboard and wait. The sediment will fall and then you just drain off the clear oil. The remaining oil with the sediment in it I use for tools, hinges etc and other DIY uses.
This site http://www.ehow.com/how_6673045_build-olive-oil-press.html offers help.
The raw oil can be filtered by through a coffee filter or fine mesh strainer to remove particulate matter. Filtered oil is less likely to burn during cooking.
Also check out this from http://www.ehow.com/how_7767059_make-oil-processing-equipment-home.html
The oil is not ready to use after pressing. It needs to be cleaned and filtered. This requires only buckets, water, a funnel and coffee filters.
You may also want to read this before you decide if you really want to filter your oil.
-
4Have you done any of this? Sometimes the stuff on ehow can be a bit dodgy.– Cascabel ♦Commented Apr 8, 2013 at 13:53
-
no .. i havent.. we dont home press olive oil.. But many sites suggest using cofee filter..– ShaimaCommented Apr 9, 2013 at 8:10
-
Coffee filters work great for filtering oil. Restaurants routinely use giant ones to filter deep fryer oil at the end of service. You'll lose a little to absorption, but the results will be very clear. Commented May 26, 2013 at 16:20
-
The livestrong link seems to be talking about heat-treating, not filtering through a coffee filter Commented Sep 6, 2013 at 17:44
-
Paper coffee filters? Cold oil will not go through that very fast... Still-warm deep fryer oil is another matter.... Commented May 2, 2018 at 20:55
Your other choice is to let gravity do its work. Let the oil rest until its particles sink to the bottom (probably a long time), after that extraction is simpler.
-
1I don't think that is practical in realistic kitchens, and it would not help with particles small enough to remain suspended.– SAJ14SAJCommented Jul 8, 2013 at 18:14